What should I do if the toilet doesn’t hold water? Summary of popular solutions across the network in the past 10 days
Recently, the topic of home maintenance has become increasingly popular on social platforms, among which "toilet tank does not hold water" has become a high-frequency search term. The following is a solution based on the data compiled from the entire network in the past 10 days, including the cause of the failure, processing steps, and accessories purchasing guide.
1. Ranking list of common fault causes (data source: e-commerce platform repair parts sales + Q&A platform discussion volume)
| Ranking | Cause of failure | Proportion | Typical symptoms |
|---|---|---|---|
| 1 | Water inlet valve filter blocked | 43% | Water inflow speed is significantly slower |
| 2 | Float device out of adjustment | 28% | Abnormal rise and fall of water level |
| 3 | Drain valve sealing ring aging | 17% | There is a continuous sound of water leakage |
| 4 | Broken water inlet valve body | 9% | Water stains appear on the outside of the water tank |
| 5 | Insufficient water supply pipe pressure | 3% | Water pressure at other water points decreases at the same time |
2. Step-by-step solution
Step 1: Basic inspection (takes about 3 minutes)
1. Close the angle valve and drain the water tank
2. Check whether the water supply pipe is kinked
3. Confirm whether the household water pressure is normal (you can open other faucets at the same time to test)
Step 2: Clean the filter (tools required: old toothbrush + white vinegar)
1. Remove the water inlet valve by turning it counterclockwise.
2. Use a toothbrush to clean the scale on the conical filter
3. Soak in white vinegar for 15 minutes and rinse
4. It is effective if the water inflow volume in a single test is increased by 30%.
Step 3: Float adjustment (compare differences between different models)
| Float type | Adjustment method | standard water level |
|---|---|---|
| traditional ball | bent metal rod | 2cm below the overflow pipe |
| New column type | Turn the adjustment screw | Mark below the MAX line |
| All-in-one | Press the buckle to slide | 1.5cm above the drain valve |
3. Accessories purchasing guide (based on JD/Tmall hot sales data)
| Accessory name | average price | Recommended brands | Service life |
|---|---|---|---|
| Drain valve seal | 8-15 yuan | Jiumu/Wrigley | 2-3 years |
| All copper water inlet valve | 35-60 yuan | Huida/Hengjie | More than 5 years |
| Float assembly | 25-40 yuan | Dongpeng/Faensa | 3-4 years |
4. Recent hot-related issues
1.Water saving renovation plan: The Douyin topic "#1 yuan remodeling the toilet" has been viewed 28 million times, and the method of using mineral water bottles to adjust the water level has caused controversy
2.Smart toilet comparison: Zhihu hot post discussing traditional toilet repair costs vs smart toilet replacement costs
3.DIY repair risks: Actual measurements by the UP owner of Station B show that the probability of water leakage due to improper installation is as high as 27%.
5. Professional advice
1. Continuous water dripping at night requires immediate repair, which can waste 3 tons of water per month.
2. Ceramic valve core is 5 times more durable than plastic valve core
3. After repair, it is recommended to use food coloring to test for leaks (drop the coloring into the water tank to observe the color of the seat)
If the problem persists after trying the above methods, it is recommended to contact a licensed plumber. According to the latest data from 58.com, the average price of toilet repair services is 80-150 yuan, and replacing a full set of accessories costs about 200-300 yuan.
check the details
check the details
en
